Head studs to suit XR6 Turbo / F6 / G6E from BA to FGX.

The std head bolts that came on a XR6 T have a clamping force of 4000 kgs onto your head gasket  when installed as per manufactures instructions. This provides a fair job of clamping the original head gasket.

Our ITMS head studs increase the cylinder head gasket clamping force to 7000 kgs , That is a huge head gasket clamping force gain. many years of experimentation have been put in to the development of the ITMS head stud kit.

The high 7000 kg pressure load comes from three areas of improvement over other products on the market. The stud its self is thicker by .75 mm in the area in between the threads. The 12 point nut has been improved by increasing the flange area on the bottom of the nut to disperse the load more evenly and last the Precision ground washer is lager then most other products on the market.

This product can be used many times over and over and also comes with a lifetime warranty.

If you have any questions just click on the contact us button below and I will be happy to answer any question you may have. 0005012


Contact us